Overview of Metrol Tool setter
| Tool Setter for CNC machine tools are used to detect the position of the cutter blades for compensation. *Machines such as lathes, machining centers, drilling machines, milling machines, and boring machines. When the blade is pressed against the contact, high-accuracy signal is output to the CNC or PC. And the position of the blade is stored automatically. As a result, it is no longer necessary to repeat the process of trial grinding, measurement caluculation, and input to the CNC, thereby eliminating the need for expertise in tool setting while also eliminating any concern over damaging the machine due to setting errors. Tool wear and breakage can be detected. (In 1995, Award of the Director-General of the Science and Technology Agency) |
Tool setter Product List
Tool setter for CNC Lathes (Tool Eye)
 HA Standard type 1~5 -signal (standard:4) ・H4A-04-00A ・H4A-08-02A ・H4A-08-07S, etc. |
 HD Rotating contact type 1-signal ・H4D-05-03S ・H4D-05-06S ・H4D-05-07S, etc. |
 HE Swing type 1~4 -signal (standard:4) ・H4E-18-15S, etc. |
Pictures of Tool setter for CNC Lathes (Tool Eye)
Tool setter for CNC machining centers
 P11 Flat type Standard model ・P11DDBP, etc. |
 TM26B Cylinderical type Compact ・TM26B-2-1-02, etc. |
 T24 Cylinderical type Standard model ・T24E-13-25 ・T25H-02-02, etc. |
 T24 Cylinderical type Large diameter contact φ40 / φ60 / φ100 ・T24E-39-01 , etc. |
 T20 Vertical Square type Standard model ・T20B-14-50 ・T20B-43-02F, etc. |
 T24 Vertical Square type for CNC tapping machine ・T1001-02S ・T20B-14-26, etc. |
Pictures of Tool setter for CNC machining centers
Other sensors for CNC Machine tool
 K1A Work sensor 1-direction  |
 K2A Work sensor 3-direction  |
 K3MA Work sensor All-direction (for robots)  |
 E2A End locator for cylinedrical grinder  |
 DFM3 Drill Bit Breakage Detection Sensor |
Pictures of Other sensors for CNC Machine tool
Ultra-precision Switch series
 P series 0.0005mm in repetitive accuracy MT-Touch Sensor |
 PT series M5 x 17mm / 0.001mm Ultra small size switch PT-Touch Sensor |
 CS series M5 Compact design The best-seller switch CS-Touch Sensor |
 ST seres 2 tasks with 1 device Stopper Bolt with a Built-in Switch |
 STM series ø8 x 8, Withstand load 3000N Stopper Mini with a Built-in Switch |
 CSC series Sort defectives without a sequencer 2-class discrimination type |
Pictures of Precision Switches
RSS Feeds